OVERVIEW OF APC UPS VT 40kVA 400V:
The APC UPS VT 40kVA 400V has an automatic internal bypass – Supplies utility power to the connected loads in the event of a UPS power overload or fault and allows additional run time to be quickly added as needed. The battery intelligent management maximizes battery performance, life, and reliability through intelligent, precision charging. The hot swappable battery ensures clean, uninterrupted power to protected equipment while batteries are being replaced. Automatic restart of loads after UPS shutdown and automatically starts up the connected equipment upon the return of utility power, the temperature compensated battery charging allows it to prolongs battery life by regulating the charge voltage according to battery temperature. The network manageable provides remote power management of the UPS over the network and infraStruXure manager compatible – Enables centralized management via the APC InfraStruXure Manager. The Smart Slot customizes UPS capabilities with management cards. It also has LED status indicators which quickly helps you to understand unit and power status with visual indicators and provides management of the UPS via a serial port. The APC UPS VT 40kVA 400V also have some features like Plug-and-Play external batteries – Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Rack/Tower convertible – Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Flash upgradeable firmware – Install maintenance releases of firmware remotely using FTP. User-replaceable batteries – Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Automatic self-test – Periodic battery self-test ensures early detection of a battery that needs to be replaced. Predictive failure notification – Provides early-warning fault analysis ensuring proactive component replacement. Disconnected battery notification – Warns when a battery is not available to provide backup power. Audible alarms – Provides notification of changing utility power and UPS power conditions Frequency and voltage regulation – Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Power conditioning – Protects connected loads from surges, spikes, lightning, and other power disturbances. Input power factor correction – Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible – Ensures clean, uninterrupted power to protected equipment when generator power is used. Cold-start capable – Provides temporary battery power when the utility power is out. Resettable circuit breaker – Easy recovery from overloads; no need to replace a fuse. Safety-agency approved – Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Output power capacity:40KVA / 400VA
Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte leak-proof
Typical recharge time: 2.5 hours at full load
Interface Port(s): 1 x management (RS-232) – 9 pin D-Sub (DB-9) 1 x management (Ethernet) – RJ-45
Surge energy rating: 480 Joules
Dimension: Height 22.2cm, Width 48.3cm, Depth 66cm
Operating Environment: 0°C- 40°C
There are no reviews yet.